- 网站导航 -
Address: HOME > Blogs > Industry News >
Time:2026-11-04 11:42:56 Author:Tusheng Clicks:198Second-rate
Nothing is more annoying than a truck that shakes violently every time it pulls away. Clutch judder feels as if the drivetrain is bouncing, and it only gets worse until something breaks. Most judder has a clear cause, and once the cause is found, the fix is usually straightforward.
Judder is a self-excited vibration that happens when the friction disc does not grip smoothly across its full surface. Instead of engaging gradually, it grabs and releases rapidly, causing the whole truck to shake. It appears most often when pulling away in first or reverse gear.
The single most common cause is oil on the clutch. A leaking rear main seal or input shaft seal sprays oil onto the friction lining, which grabs unevenly. The fix is to fix the leak, replace the disc and resurface the flywheel; cleaning the old parts never works.
If the torsion springs in the clutch disc are broken, or the lining has worn unevenly, the disc cannot dampen engine torque pulses. This causes a harsh chatter on takeoff. A visual inspection usually reveals broken springs or cracked lining segments.
Overheating warps the pressure plate diaphragm and the flywheel surface. When the contact surface is not flat, the clutch grabs in spots. This type of judder gets worse as the truck warms up, and it requires machining or replacement of the warped parts.
Worn engine or transmission mounts allow the powertrain to move under torque, which changes clutch geometry and induces judder. If the clutch looks good but the shaking continues, inspect the mounts for cracking or collapsed rubber. Tighten all mounting bolts before blaming the clutch.
WANG H, LI X. Wear prediction model for automotive friction clutch facings[J]. Tribology International, 2019, 137: 312-321.
Garcia, Miguel, and Jose Martinez. "Thermal Analysis of a Ceramic Friction Clutch Plate Under Heavy Load." Tribology International, vol. 148, 2020, pp. 106-115.
Kim, J., and Park, S. (2019). Dynamic modeling of clutch judder caused by friction lining degradation. Journal of Mechanical Science and Technology, 33(8), 3621-3630.