- 网站导航 -
Address:HOME > Products > Fuel Filter >
The Fuel Filter 1000422382 is a spin-on or insert-style filtration component that protects the engine by trapping dirt, rust, water and other contaminants from the fluid passing through it. Depending on the application, it filters diesel fuel, lubricating oil or separates water from fuel, keeping the injection system, pump, bearings and moving parts clean. It is supplied as a replacement filter element or spin-on cartridge for workshops, fleet maintenance teams and aftermarket distributors looking for a dependable filter matching the original part dimensions and connection.
Every Fuel Filter 1000422382 is built around a pleated filter media pack, a perforated centre tube, end caps and a sealed housing or base. The media captures particles as fluid flows through it, while the centre tube supports the pleats against system pressure. A bypass valve or seal arrangement keeps the filter stable under cold starts and varying pressure, and each unit is inspected for seal fit and construction before packing.
A filter element removes unwanted particles and liquid contaminants from the fluid before it reaches sensitive engine components. Fuel filters protect the injection pump and injectors from abrasion and corrosion, oil filters keep lubricating oil clean for bearings and moving parts, and fuel water separators drain condensed water that can damage injectors and fuel pumps. The connection thread, gasket size, height and flow rating must match the original filter, so buyers should confirm the OE reference, engine model and part number before ordering.
The Fuel Filter 1000422382 uses high-efficiency pleated media, a rigid centre tube, bonded end caps and a sealing gasket to provide consistent filtration over its service interval. The pleated layout gives a large active filtration area inside a compact housing, while the centre tube prevents the media from collapsing under pressure differential. Spin-on units combine housing, media and base in one disposable canister, while element-style filters fit into a separate housing.
The media is selected to balance fine particle capture with acceptable flow resistance, and the end caps are sealed to prevent unfiltered fluid from bypassing the media. Gaskets and O-rings are sized to the mounting base to prevent leaks, and any built-in bypass or anti-drainback features are matched to the engine application. Materials resist oil, fuel and heat, and each filter is checked for dimensions, seal fit and construction quality before leaving production.
The Fuel Filter 1000422382 is identified by its thread or connection type, gasket size, overall height, media rating and flow capacity. These details vary by engine model and OE reference, so the exact filter should be matched against the original part before purchase. Buyers should confirm whether the application needs a fuel filter, fuel water separator, oil filter or filter element, and the relevant OEM or cross-reference number.
Filters of this kind are fitted to trucks, vans, buses, agricultural machines, construction equipment and passenger diesel or petrol engines that use a matching filter housing. They are supplied as spin-on cans, replaceable elements or separator cartridges, and can be stocked alongside related fuel and lubrication parts. Because connection size, gasket shape and rating differ between engines and between fuel and oil circuits, the unit should be cross-checked against the original part number and engine details.
A properly matched Fuel Filter 1000422382 helps protect injectors, pumps and bearings from abrasive particles, maintains clean fluid circulation and supports consistent engine performance. Reliable sealing prevents unfiltered fluid from bypassing the media, while the pleated area maintains flow even as dirt loads up over the service interval. Correct filtration also helps reduce wear and extend the service life of downstream components.
Each filter is inspected for media quality, centre tube fit, end-cap bonding, gasket dimensions and seal before leaving the line. Dimensions and connection details are checked against the drawing, and samples are tested for filtration efficiency and pressure behaviour under representative flow conditions. Finished filters are packed to protect the seal and media during storage and transport.
When fitting the Fuel Filter 1000422382, replace the old gasket fully, clean the mounting base, and lubricate the new gasket with the appropriate fluid before threading the unit on. Tighten spin-on filters by the recommended turn after gasket contact, and do not over-tighten. For element-style filters, replace the pleated cartridge, inspect the housing bowl and drain water from separators during the change.
Follow the engine manufacturer's service interval for filter replacement, especially under dusty, wet or heavy-load operating conditions. Drain accumulated water from fuel separators regularly, and check for leaks around the gasket after starting the engine. If fuel pressure drops, the engine misfires, oil pressure falls or the filter shows signs of contamination, inspect the filter and fluid condition promptly.
How do I choose the correct replacement filter? Match the thread or connection, gasket size, height, flow rating and filter type to the original part. Providing the engine model, vehicle and original filter number allows the correct cross-reference to be confirmed.
How often should a filter be changed? Change filters according to the engine service schedule, and shorten the interval under dusty, humid or heavy-load use. Fuel separators should be drained regularly between filter changes.
What is the difference between a fuel filter and a fuel water separator? A fuel filter mainly traps solid particles, while a water separator removes condensed water from diesel before it reaches the injectors; some units combine both functions in one housing.